Software /
code /
prosody
File
doc/stanza_routing.txt @ 11516:83822be7704d
util.xmppstream: Send <?xml?> declaration in same call as stream open
If network_settings.opportunistic_writes is enabled then this would
previously have resulted in two socket writes, and possibly two packets
being sent. This caused some issues in older versions of Gajim, which
apparently expected the stream opening in the first packet, and thus it
could not connect.
With this change and opportunistic_writes enabled, the first packet
should contain both the xml declaration and the stream open tag.
Without opportunistic_writes, there should be no observable change.
Tested with Gajim 1.1.2 (on same machine). Unsure if loopback behaves
differently than the network here.
author | Kim Alvefur <zash@zash.se> |
---|---|
date | Wed, 14 Apr 2021 15:21:13 +0200 |
parent | 22:2856dfc1f5cc |
line wrap: on
line source
No 'to' attribute: IQ: Pass to appropriate handler Presence: Broadcast to contacts - if initial presence, also send out presence probes - if probe would be to local user, generate presence stanza for them Message: Route as if it is addressed to the bare JID of the sender To a local host: IQ: Pass to appropriate handler Presence: - Message: Deliver to admin? To local contact: Bare JID: IQ: Pass to appropriate handler Presence: Broadcast to all resources Message: Route to 'best' resource Full JID: IQ: Send to resource Presence: Send to resource Message: Send to resource Full JID but resource not connected: IQ: Return service-unavailable Message: Handle same as if to bare JID Presence: Drop (unless type=subscribe[ed]) To remote contact: Initiate s2s connection if necessary Send stanza across