File

doc/stanza_routing.txt @ 11682:7843f1ca3b33

mod_s2s: Vary log level by remote stream error Increases log level for stream conditions that could indicate a problem on our end, especially programming errors like invalid XML, or the remote server saying that our certificate is invalid, since these should be investigated. Non-issues like closing of idle streams are lowered to debug since it's mostly noise. Other issues left at info are mostly about changes to the remote server, e.g. complete or partial shutdown.
author Kim Alvefur <zash@zash.se>
date Wed, 14 Jul 2021 02:41:15 +0200
parent 22:2856dfc1f5cc
line wrap: on
line source

No 'to' attribute:
	IQ:			Pass to appropriate handler
	Presence:		Broadcast to contacts
				- if initial presence, also send out presence probes
					- if probe would be to local user, generate presence stanza for them
	Message:		Route as if it is addressed to the bare JID of the sender

To a local host:
	IQ:			Pass to appropriate handler
	Presence:		-
	Message:		Deliver to admin?

To local contact:
	Bare JID:
		IQ:		Pass to appropriate handler
		Presence:	Broadcast to all resources
		Message:	Route to 'best' resource
	Full JID:
		IQ:		Send to resource
		Presence:	Send to resource
		Message:	Send to resource
	Full JID but resource not connected:
		IQ:		Return service-unavailable
		Message:	Handle same as if to bare JID
		Presence:	Drop (unless type=subscribe[ed])

To remote contact:
	Initiate s2s connection if necessary
	Send stanza across