Diff

--- a/prosody.cfg.lua.dist	Tue Oct 20 13:25:29 2009 +0100
+++ b/prosody.cfg.lua.dist	Tue Oct 20 18:12:46 2009 +0100
@@ -1,110 +1,110 @@
--- Prosody Example Configuration File 
--- 
--- If it wasn't already obvious, -- starts a comment, and all 
--- text after it on a line is ignored by Prosody.
---
--- The config is split into sections, a global section, and one 
--- for each defined host that we serve. You can add as many host 
--- sections as you like.
---
--- Lists are written { "like", "this", "one" } 
--- Lists can also be of { 1, 2, 3 } numbers, and other things. 
--- Either commas, or semi-colons; may be used
--- as seperators.
---
--- A table is a list of values, except each value has a name. An 
--- example table would be:
---
--- ssl = { key = "keyfile.key", certificate = "certificate.cert" }
---
--- Whitespace (that is tabs, spaces, line breaks) is mostly insignificant, so 
--- can 
--- be placed anywhere that 	you deem fitting.
---
--- Tip: You can check that the syntax of this file is correct when you have finished
--- by running: luac -p prosody.cfg.lua
--- If there are any errors, it will let you know what and where they are, otherwise it 
--- will keep quiet.
---
--- The only thing left to do is rename this file to remove the .dist ending, and fill in the 
--- blanks. Good luck, and happy Jabbering!
-
--- Server-wide settings go in this section
-Host "*"
-	
-	-- This is a (by default, empty) list of accounts that are admins 
-	-- for the server. Note that you must create the accounts separately
-	-- (see http://prosody.im/doc/creating_accounts for info)
-	-- Example: admins = { "user1@example.com", "user2@example.net" }
-	admins = { }
-	
-	-- This is the list of modules Prosody will load on startup.
-	-- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too.
-	modules_enabled = {
-			-- Generally required
-				"roster"; -- Allow users to have a roster. Recommended ;)
-				"saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
-				"tls"; -- Add support for secure TLS on c2s/s2s connections
-				"dialback"; -- s2s dialback support
-			  	"disco"; -- Service discovery
-			
-			-- Not essential, but recommended
-				"private"; -- Private XML storage (for room bookmarks, etc.)
-				"vcard"; -- Allow users to set vCards
-			
-			-- Nice to have
-				"legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
-				"version"; -- Replies to server version requests
-			  	"uptime"; -- Report how long server has been running
-			  	"time"; -- Let others know the time here on this server
-			  	"ping"; -- Replies to XMPP pings with pongs
-			  	"pep"; -- Enables users to publish their mood, activity, playing music and more
-				"register"; -- Allow users to register on this server using a client and change passwords
-
-			-- Other specific functionality
-				--"posix"; -- POSIX functionality, sends server to background, enables syslog, etc.
-			  	--"console"; -- telnet to port 5582 (needs console_enabled = true)
-				--"bosh"; -- Enable BOSH clients, aka "Jabber over HTTP"
-				--"httpserver"; -- Serve static files from a directory over HTTP
-			  };
-	
-	-- These modules are auto-loaded, should you
-	-- for (for some mad reason) want to disable
-	-- them then uncomment them below
-	modules_disabled = {
-			-- "presence";
-			-- "message";
-			-- "iq";
-	};
-
-	-- Disable account creation by default, for security
-	-- For more information see http://prosody.im/doc/creating_accounts
-	allow_registration = false;
-	
-	-- These are the SSL/TLS-related settings. If you don't want
-	-- to use SSL/TLS, you may comment or remove this
-	ssl = { 
-		key = "certs/localhost.key";
-		certificate = "certs/localhost.cert";
-		}
-
--- This allows clients to connect to localhost. No harm in it.
-Host "localhost"
-
--- Section for example.com
--- (replace example.com with your domain name)
-Host "example.com"
-
-	enabled = false -- This will disable the host, preserving the config, but denying connections
-
-	-- Assign this host a certificate for TLS, otherwise it would use the one
-	-- set in the global section (if any).
-	-- Note that old-style SSL on port 5223 only supports one certificate, and will always
-	-- use the global one.
-	ssl = { 
-		key = "certs/example.com.key";
-		certificate = "certs/example.com.crt";
-		}
-
--- Set up a MUC (multi-user chat) room server on conference.example.com:
-Component "conference.example.com" "muc"
+-- Prosody Example Configuration File 
+-- 
+-- If it wasn't already obvious, -- starts a comment, and all 
+-- text after it on a line is ignored by Prosody.
+--
+-- The config is split into sections, a global section, and one 
+-- for each defined host that we serve. You can add as many host 
+-- sections as you like.
+--
+-- Lists are written { "like", "this", "one" } 
+-- Lists can also be of { 1, 2, 3 } numbers, and other things. 
+-- Either commas, or semi-colons; may be used
+-- as seperators.
+--
+-- A table is a list of values, except each value has a name. An 
+-- example table would be:
+--
+-- ssl = { key = "keyfile.key", certificate = "certificate.cert" }
+--
+-- Whitespace (that is tabs, spaces, line breaks) is mostly insignificant, so 
+-- can 
+-- be placed anywhere that 	you deem fitting.
+--
+-- Tip: You can check that the syntax of this file is correct when you have finished
+-- by running: luac -p prosody.cfg.lua
+-- If there are any errors, it will let you know what and where they are, otherwise it 
+-- will keep quiet.
+--
+-- The only thing left to do is rename this file to remove the .dist ending, and fill in the 
+-- blanks. Good luck, and happy Jabbering!
+
+-- Server-wide settings go in this section
+Host "*"
+	
+	-- This is a (by default, empty) list of accounts that are admins 
+	-- for the server. Note that you must create the accounts separately
+	-- (see http://prosody.im/doc/creating_accounts for info)
+	-- Example: admins = { "user1@example.com", "user2@example.net" }
+	admins = { }
+	
+	-- This is the list of modules Prosody will load on startup.
+	-- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too.
+	modules_enabled = {
+			-- Generally required
+				"roster"; -- Allow users to have a roster. Recommended ;)
+				"saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
+				"tls"; -- Add support for secure TLS on c2s/s2s connections
+				"dialback"; -- s2s dialback support
+			  	"disco"; -- Service discovery
+			
+			-- Not essential, but recommended
+				"private"; -- Private XML storage (for room bookmarks, etc.)
+				"vcard"; -- Allow users to set vCards
+			
+			-- Nice to have
+				"legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
+				"version"; -- Replies to server version requests
+			  	"uptime"; -- Report how long server has been running
+			  	"time"; -- Let others know the time here on this server
+			  	"ping"; -- Replies to XMPP pings with pongs
+			  	"pep"; -- Enables users to publish their mood, activity, playing music and more
+				"register"; -- Allow users to register on this server using a client and change passwords
+
+			-- Other specific functionality
+				--"posix"; -- POSIX functionality, sends server to background, enables syslog, etc.
+			  	--"console"; -- telnet to port 5582 (needs console_enabled = true)
+				--"bosh"; -- Enable BOSH clients, aka "Jabber over HTTP"
+				--"httpserver"; -- Serve static files from a directory over HTTP
+			  };
+	
+	-- These modules are auto-loaded, should you
+	-- for (for some mad reason) want to disable
+	-- them then uncomment them below
+	modules_disabled = {
+			-- "presence";
+			-- "message";
+			-- "iq";
+	};
+
+	-- Disable account creation by default, for security
+	-- For more information see http://prosody.im/doc/creating_accounts
+	allow_registration = false;
+	
+	-- These are the SSL/TLS-related settings. If you don't want
+	-- to use SSL/TLS, you may comment or remove this
+	ssl = { 
+		key = "certs/localhost.key";
+		certificate = "certs/localhost.cert";
+		}
+
+-- This allows clients to connect to localhost. No harm in it.
+Host "localhost"
+
+-- Section for example.com
+-- (replace example.com with your domain name)
+Host "example.com"
+
+	enabled = false -- This will disable the host, preserving the config, but denying connections
+
+	-- Assign this host a certificate for TLS, otherwise it would use the one
+	-- set in the global section (if any).
+	-- Note that old-style SSL on port 5223 only supports one certificate, and will always
+	-- use the global one.
+	ssl = { 
+		key = "certs/example.com.key";
+		certificate = "certs/example.com.crt";
+		}
+
+-- Set up a MUC (multi-user chat) room server on conference.example.com:
+Component "conference.example.com" "muc"