File

mod_reload_components/README.markdown @ 5571:ca3c2d11823c

mod_pubsub_feeds: Track latest timestamp seen in feeds instead of last poll This should ensure that an entry that has a publish timestmap after the previously oldest post, but before the time of the last poll check, is published to the node. Previously if an entry would be skipped if it was published at 13:00 with a timestamp of 12:30, where the last poll was at 12:45. For feeds that lack a timestamp, it now looks for the first post that is not published, assuming that the feed is in reverse chronological order, then iterates back up from there.
author Kim Alvefur <zash@zash.se>
date Sun, 25 Jun 2023 16:27:55 +0200
parent 2391:85d04dd87f14
line wrap: on
line source

Introduction
============

This module allows to load/unload external components after they have
been added/removed to a configuration file. It is necessary to explicitly
initiate a reload on Prosody either via prosodyctl reload or config:reload().

Example 1:
--------
If Prosody has started with this configuration file:

``` {.lua}
VirtualHost "example.com"
    authentication = "internal_plain"

Component "a.example.com"
    component_secret = "a"

Component "b.example.com"
    component_secret = "b"
```

And the file has changed manually or dynamically to:

``` {.lua}
VirtualHost "example.com"
    authentication = "internal_plain"

Component "a.example.com"
    component_secret = "a"

Component "c.example.com"
    component_secret = "c"
```

Then, the following actions will occur if this module is loaded:

1. The component c.example.com will be loaded and start bouncing for
authentication.
2. The component b.example.com will be unloaded and deactivated. The
connection with it will not be closed, but no further actions will be
executed on Prosody.

Example 2:
--------

If Prosody has started with this configuration file:

``` {.lua}
VirtualHost "example.com"
    authentication = "internal_plain"

Component "a.example.com"
    component_secret = "a"
```

And the file has changed manually or dynamically to:

``` {.lua}
VirtualHost "example.com"
    authentication = "internal_plain"

Component "a.example.com"
    component_secret = "a"

VirtualHost "newexample.com"
        authentication = "internal_plain"

Component "a.newexample.com"
    component_secret = "a"
```

Then, the following actions will occur if this module is loaded:

1. The component a.newexample.com will be loaded and start bouncing for
authentication. Note that its respective VirtualHost is not loaded. Bad
things may happen.

Usage
=====

Copy the module folder into your Prosody modules directory. Place the
module between your enabled modules either into the global or a vhost
section.

No configuration directives are needed

Info
====

-   0.9, works