Comparison

mod_pubsub_mqtt/README.markdown @ 1803:4d73a1a6ba68

Convert all wiki pages to Markdown
author Kim Alvefur <zash@zash.se>
date Fri, 28 Aug 2015 18:03:58 +0200
child 3320:2333e384409d
comparison
equal deleted inserted replaced
1802:0ab737feada6 1803:4d73a1a6ba68
1 ---
2 labels:
3 - 'Stage-Beta'
4 summary: 'MQTT interface to Prosody''s pubsub'
5 ...
6
7 Introduction
8 ------------
9
10 [MQTT](http://mqtt.org/) is a lightweight binary pubsub protocol suited
11 to embedded devices. This module provides a way for MQTT clients to
12 connect to Prosody and publish or subscribe to local pubsub nodes.
13
14 Details
15 -------
16
17 MQTT has the concept of 'topics' (similar to XMPP's pubsub 'nodes').
18 mod\_pubsub\_mqtt maps pubsub nodes to MQTT topics of the form
19 `HOST/NODE', e.g.`pubsub.example.org/mynode\`.
20
21 ### Limitations
22
23 The current implementation is quite basic, and in particular:
24
25 - Authentication is not supported
26 - SSL/TLS is not supported
27 - Only QoS level 0 is supported
28
29 ### Payloads
30
31 XMPP payloads are always XML, but MQTT does not define a payload format.
32 Therefore mod\_pubsub\_mqtt will attempt to convert data of certain
33 recognised payload types. Currently supported:
34
35 - JSON (see [XEP-0335](http://xmpp.org/extensions/xep-0335.html) for
36 the format)
37 - Plain UTF-8 text (wrapped inside
38 `<data xmlns="https://prosody.im/protocol/mqtt"/>`)
39
40 All other XMPP payload types are sent to the client directly as XML.
41 Data published by MQTT clients is currently never translated, and always
42 treated as UTF-8 text.
43
44 Configuration
45 -------------
46
47 There is no special configuration for this module. Simply load it on
48 your pubsub host like so:
49
50 Component "pubsub.example.org" "pubsub"
51 modules_enabled = { "pubsub_mqtt" }
52
53 You may also configure which port(s) mod\_pubsub\_mqtt listens on using
54 Prosody's standard config directives, such as `mqtt_ports`. Network
55 settings **must** be specified in the global section of the config file,
56 not under any particular pubsub component. The default port is 1883
57 (MQTT's standard port number).
58
59 Compatibility
60 -------------
61
62 ------- --------------
63 trunk Works
64 0.9 Works
65 0.8 Doesn't work
66 ------- --------------